Title: How To: Print on Special Paper
|
Audience: Faculty / Staff
|
Applies to: Printer Settings
|
Category: Service Information / Enterprise Apps & Software Information
|
Prerequisites: Access to a computer/laptop, connected to the network.
|
| |
Problem: N/A
|
| |
Description / Summary: This cheat sheet will help you print on paper that is different than the typical plain white paper that’s pre-loaded in your device. This article covers plain weight papers. For instruction on printing on cardstocks, please see the article titled "How To: Print on Card Stock".
|
| |
Makes and Models: Konica Minolta bizhub: INFO-Palette Series copiers (model numbers ending in 4, 4e, 7, 8, 8e, 9 & i).
Simply placing your paper in the bypass tray, yelling out “Nobody Print!!” and then selecting “bypass tray” from your printer driver will not necessarily prevent the device from switching to a different tray if it runs out of your paper half-way through printing, or from someone else’s job printing on your special paper. Use the steps below to ensure proper printing every time.
1. Click File, Print and then Printer Properties (or Printing Preferences)to open the printer driver.
2. From the Basic tab select the Paper Type you wish to print on. Note: Leave the Paper Tray set to AUTO!
3. Select any other settings you need (eg. double siding, colour, etc).
4. Click Ok and then Print to send the job to the device.
5. At the device, when prompted,load your paper in the Bypass Tray as instructed. Press Complete on the screen (if required).
Tips and Tricks: Please see attached document for the recommended settings for your paper type.
There are many additional tips and tricks in the attached document.